Product Specifications
10KVA input power for casting & 15 KVA for graining.
3-Phase, 50/60 Hz, system with input rating of:

 - 42A at 208 VAC, 39A at 220 VAC, 36A at 240 VAC,
 - 23A at 380 VAC, 21 A at 415 VAC

Pure gold melting capacity = 8.13 kg, with graining crucible volume capacity of 421 cc
18 Karat gold melting capacity = 6.53 kg, with graining crucible volume capacity of 421 cc

Stering silver melting capacity = 4.38 kg,with graining capacity volume capacity of 421 cc
Flask capacity of 15 cm (6 inches) diameter × 30.5 cm (12 inches) height, for high-production casting
Ease of operation via user-friendly, modern graphics touch screen control panel
Unique grain-feeding system to reduce the introduction of oxygen  to melt chamber
Sealed, water- cooled cabinet, elimating dust, moisture, corrosives from degarding machine electronics & components improved graining system (Option)
Flexible flask system to accept either flanged or flangeless flasks.
New flask alignment system to ensure perfect alignment of flask and crucible
New Type A consumables for improved, consistent high-quality fills
Advanced Dynamic Computer (ADC) – Self-programing computer with artificial intelligence, assuring complete mixing of metals, shotening the casting cycles and improving casting temperature accuracy
Pressure Monitoring  System to prevent casting blown-out flasks
Auto-Cal system for true accurate power control and optimal cycle times, independent of load.
New mode selection program to choose Manual Casting, Auto Casting, Alloying, or Graining.
Automatic crucible life extension system upon shut-down
Improved gas flow for both crucible & flask chambers to prevent oxidation and to extend life of consumables
Water-cooled crucible and hood chambers
Pulsed-Power Stirring (PPS) technology for metal homogeneity
Serectable pre-programmed to temperature profiles for casting&alloying
Casting data collection automatically sent to your PC
(via RS-232 port to modem) to achieve consistent casting results
Automatic calibration to type K or type S thermocouple:

- Maximum casting temperature is 1200 degrees C or 2200 degrees F (with type K thermocouple)
- Maximum casting temperature is 1510 degrees C or 2750 degrees F (with type S thermocouple)

Superior design of accessories to increase dependability&production efficiency Voltage&current monitoring and protection on all phases
Powerful 18-turn induction coil is fully encepsulated for extra safety&extended life
Enhanced machine operating & sevicing features to avoid  operator’s injury
Precision-engineered machine & use of fine components for excellent reliability and safe, simple operation
Advanced self-dianostic test system with on-screen explanations of warning, historical system parametes, graphing modes, machine status modes, and error-coded messages
Compact space-saving machine footprint